




The listed price is the base price for this product. Optional customization or upgrades are available and will increase the final total only when selected. Any additional cost will be clearly shown on this page before checkout. No hidden charges are applied. Custom made-to-order items are safely delivered within 19–28 business days to account for premium leather tailoring, dedicated safety inspections, and international transit.
The Suzuki GSX-R Blue Motorcycle Leather Racing Gloves Pro are finished in Suzuki Racing team colours, reproduced in leather patchwork rather than print.
Built from full-grain cowhide with CE certified knuckle protection, reinforced palm padding and pre-curved fingers. Made to order in standard sizes or to your own hand measurements.
| Short Racing Gloves | Gauntlet Racing Gloves | |
|---|---|---|
| Cuff length | Ends at the wrist | Extends over the jacket or suit cuff |
| Best for | Street riding, commuting, summer | Track days, racing, high speed |
| Wrist coverage | Strap only | Strap plus forearm cuff |
| Airflow | Higher | Lower |
| Suit compatibility | Sits under the sleeve | Seals over the sleeve, no skin gap |
If you ride on track or wear a one piece leather suit, choose a gauntlet cut. The overlapping cuff removes the gap at the wrist where a suit sleeve and a short glove separate under slide forces.
Most often ordered by riders on the Suzuki GSX-R1000, GSX-R750, GSX-R600 and Hayabusa, and by anyone matching gloves to Suzuki leathers. Any pair can be produced in a colourway matched to your bike or the rest of your gear.
Gloves are the hardest piece of riding kit to buy off the shelf, because hand width and finger length vary independently — most riders sit between two standard sizes. Every pair here can be made to your own measurements.
Measure the circumference of your palm around the knuckles, excluding the thumb, and the length from the base of your palm to the tip of your middle finger. Send both figures with your order and the gloves are cut to those dimensions. Full instructions are on the size guide.
Are these motorcycle gloves CE certified?
Yes. The knuckle protection fitted to these gloves is CE certified. Full protection documentation across the range is on the protection and safety page.
Can you match my Suzuki’s colours?
Yes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows, so the gloves sit correctly alongside the bike and the rest of your gear.
Are the seams inside or outside?
Main seams are stitched with high-strength bonded nylon thread and positioned away from the primary contact areas, so they do not sit under the palm where they would abrade first.
Can I wash leather gloves?
No. Never machine wash or soak them — water strips the oils from the hide and the leather hardens as it dries. Wipe with a damp cloth and condition when needed.
What size motorcycle gloves should I order?
Measure your palm circumference around the knuckles and your hand length from palm base to middle fingertip, then check both against the size guide. If you fall between two sizes, send your measurements and the gloves are made to fit rather than rounded up or down.
Can I get gloves to match my suit or jacket?
Yes. Any glove can be produced in the colours of a leather racing suit or leather motorcycle jacket, including rider numbers and team colours.
What is the difference between racing gloves and winter riding gloves?
Racing gloves prioritise abrasion resistance, knuckle protection and bar feel, with minimal insulation. Winter gloves add thermal lining and waterproofing at the cost of bulk and feel. For track and sport riding, choose a racing glove.




