Custom Leather Race Suit One Piece

The Custom Leather Race Suit One Piece is a made-to-order, one-piece motorcycle racing suit in full-grain cowhide. Every suit is cut and stitched to the individual rider.

You choose the colors, logos, name and number. Underneath the design it is a full race-specification suit: full-grain cowhide, CE Level 2 armor at the shoulders, elbows, knees and back, and triple-stitched seams. It is made for men and women, is cut to take an airbag vest underneath, and suits track days, circuit riding and fast road use.

Why Choose a Custom One Piece Race Suit

• One-piece construction, which most track day organizers and race clubs require
• Cut to your own measurements instead of a stock size, so the armor stays on the joints it protects
• Your colors, your logos and your name and number, reproduced in leather patchwork
• Men's and women's cuts, both made to measure at the same price as a standard size

Outer Shell

• Full-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade
• Design reproduced in leather patchwork, cut and stitched from colored hide so it cannot crack, peel or fade like print
• Pre-curved sleeves and legs with race-fit ergonomic paneling for a natural riding position
• Perforated chest and back panels for airflow
• Triple safety stitching throughout with high-strength bonded nylon thread
• Original YKK zippers at the front, sleeve cuffs and ankles
• Kevlar stretch panels at the crotch, behind the calves and under the sleeves
• Accordion leather stretch across the lower back and above the knees for a forward racing crouch
• Reinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs
• External CE certified protectors over the shoulders, elbows and knees
• Removable external knee sliders with hook-and-loop attachment

Inner Shell

• Removable CE Level 2 shoulder, elbow and knee armor certified to EN 1621-1:2012
• Dedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014
• Breathable 100% polyester mesh lining for airflow and moisture management
• Two internal pockets for phone, wallet and small essentials
• Fully safety stitched interior
• Removable internal lining available as an optional upgrade

Armor Specification

Armor is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read our guide to CE Level 1 vs Level 2 armor.

Riders and Bikes

Cut for a sportbike riding position, this suit works on any sportbike, including the Suzuki GSX-R, Yamaha R1 and R7 and Aprilia RSV4. Change the colors to match your bike's paint.

Additional Customization

• Leather options: full-grain cowhide, kangaroo or Monaco hide
• Stretch material: standard Kevlar or Schoeller-Keprotec® upgrade
• Fitting: race, regular or relaxed
• Perforation: non-perforated, fully perforated, partially perforated or selective panel ventilation
• Construction: one piece as shown, or two piece with a full 360-degree connecting zip
• Inside lining: fixed or removable polyester mesh
• Colors: any colors you choose
• Logos: leather patchwork or printed, or replaced with your own logos
• Personalization: rider name, racing number, team identity or custom text
• Speed hump: optional small, medium or large
• Matching equipment: matching gloves and boots
• Custom fitting: standard sizing or tailor-made measurements for men and women

Size and Fit

Cut to a close, performance-focused racing fit. Review the size guide before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost. Our guide to measuring for a custom suit shows how to take them at home.

If you ride with an airbag vest, tell us when you order and the suit is cut with room for it underneath. A new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and molds to you over the first few rides. Fit is a safety feature: a loose suit lets armor migrate off the joint it protects during a crash.

Frequently Asked Questions

Is this a one piece racing suit?
Yes. The jacket and pants are a single garment, which is what most track day organizers and race clubs require. A two piece version with a full 360-degree zip is also available.

Is it available as a women's racing suit?
Yes. Send your measurements and the suit is cut on female proportions rather than adapted from a men's pattern.

Can I wear an airbag vest with it?
Yes. The suit can be cut to fit a separate airbag vest underneath. Let us know the vest you use when you order. The suit itself does not contain an airbag.

What armor does this suit use?
CE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows and knees to EN 1621-1:2012 — certified by Ricotest, European Notified Body No. 0498, Italy.

Can I change the colors and logos?
Yes. Keep the layout and choose any colors, swap the logos for your own, or send a photo of your bike and we match it. Read our guide to designing your own race suit.

Can I add my name and race number?
Yes. Your name, number or custom text can be added in leather patchwork, for example on the speed hump, chest or thigh.

Should I choose cowhide or kangaroo?
Kangaroo at 0.8–0.9 mm gives comparable abrasion resistance at lower weight. Full-grain cowhide at 1.3–1.4 mm is harder wearing and costs less. See kangaroo vs cowhide.

Can I get matching gloves and boots?
Yes. Any racing glove or racing boot can be produced in the same colorway.

How long does it take and do you ship worldwide?
Custom suits take about 14 to 21 business days to make. Shipping is free by DHL or FedEx to the US, Canada, the EU and Australia. See ordering, delivery and returns.

Care Instructions

• Clean the exterior with a soft, slightly damp cloth
• Use a suitable leather cleaner and conditioner when required
• Do not machine wash, tumble dry or bleach
• Remove internal armor and lining before deep cleaning
• Dry naturally, away from direct sunlight and artificial heat
• Store on a wide hanger in a cool, dry place