Marco Bezzecchi VR46 British GP 2024 MotoGP Leather Racing Suit

The Marco Bezzecchi VR46 British GP 2024 MotoGP Leather Racing Suit is finished in the VR46 colours Marco Bezzecchi raced during the 2024 MotoGP season, in the special British GP scheme run for that round.

This suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.

Outer Shell

• Full-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade
• VR46 team colours reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print
• Pre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position
• Triple safety stitching throughout with high-strength bonded nylon thread
• Original YKK zippers at the front, sleeve cuffs and ankles
• Kevlar stretch panels at the crotch, behind the calves and under the sleeves
• Accordion leather stretch across the lower back and above the knees for a forward racing crouch
• Reinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs
• External CE certified protectors over the shoulders, elbows and knees
• Removable external knee sliders with hook-and-loop attachment

Inner Shell

• Removable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012
• Dedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014
• Breathable 100% polyester mesh lining for airflow and moisture management
• Two internal pockets for phone, wallet and small essentials
• Fully safety stitched interior
• Removable internal lining available as an optional upgrade

Armour Specification

Armour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1.

Riders and Bikes

Cut for a sportbike riding position and ordered by riders on the Honda CBR, Kawasaki Ninja ZX-10R, Yamaha R1 and R7, Suzuki GSX-R and Ducati Panigale. Any livery here can be produced to match a specific bike's colour scheme.

Additional Customization

• Leather options: full-grain cowhide, kangaroo or Monaco hide
• Stretch material: standard Kevlar or Schoeller-Keprotec® upgrade
• Fitting: race, regular or relaxed
• Perforation: non-perforated, fully perforated, partially perforated or selective panel ventilation
• Construction: one piece or two piece suit
• Inside lining: fixed or removable polyester mesh
• Colours: VR46 2024 scheme or fully custom combinations
• Logos: leather patchwork or printed
• Personalisation: rider name, racing number, team identity or custom text
• Speed hump: optional small, medium or large
• Matching equipment: matching gloves, boots and leather accessories
• Custom fitting: standard sizing and tailor-made measurements for men and women

Size and Fit

Cut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.

A new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.

Frequently Asked Questions

What armour does this suit use?
CE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows and knees to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.

What is a special round livery?
A design run for a single Grand Prix weekend, usually a home round or an anniversary. It is worn for that one race and then retired, which makes special-round suits the rarest replicas after test schemes.

Can this be made as a two piece suit?
Yes. The same livery can be produced as a two piece with a full 360-degree connecting zip that runs the whole way around the waist. Specify it at the time of order, as it cannot be converted afterwards.

Can I get matching gloves and boots?
Yes. Any racing glove or racing boot can be produced in the same colourway as the suit, including team colours and rider numbers.

What if I am between two standard sizes?
That is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the size guide.

Will the colours fade over time?
The design is cut from dyed hide rather than printed, so it does not fade the way surface print does. Leather will darken and develop character with use, which is normal and does not affect protection.

Do you ship worldwide?
Yes. Every suit is made to order and shipped worldwide.

Care Instructions

• Clean the exterior with a soft, slightly damp cloth
• Use a suitable leather cleaner and conditioner when required
• Do not machine wash, tumble dry or bleach
• Remove internal armour and lining before deep cleaning
• Dry naturally, away from direct sunlight and artificial heat
• Store on a wide hanger in a cool, dry place