Custom Motorbike Leather Suit – Black One Piece Racing Suit

The Custom Motorbike Leather Suit – Black One Piece Racing Suit is built from scratch to one rider's measurements and one rider's design. Nothing here is cut to a stock pattern.

You choose the leather, the colours, the logos, the fit and the configuration. Underneath the design it is a full race-specification suit: full-grain cowhide, CE Level 2 armour at the shoulders, elbows, knees and back, and triple stitched seams throughout.

Outer Shell

• Full-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade
• Design reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print
• Pre-curved sleeves and legs with race-fit ergonomic panelling
• Triple safety stitching throughout with high-strength bonded nylon thread
• Original YKK zippers at the front, sleeve cuffs and ankles
• Kevlar stretch panels at the crotch, behind the calves and under the sleeves
• Accordion leather stretch across the lower back and above the knees for a forward racing crouch
• Reinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs
• External CE certified protectors over the shoulders, elbows and knees
• Removable external knee sliders with hook-and-loop attachment

Inner Shell

• Removable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012
• Dedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014
• Breathable 100% polyester mesh lining for airflow and moisture management
• Two internal pockets
• Fully safety stitched interior
• Removable internal lining available as an optional upgrade

Armour Specification

Armour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.

How a Custom Suit Is Built

1. Design — send a sketch, a reference photograph, or describe the colours and layout you want
2. Measurements — ten figures taken using the size guide
3. Confirmation — the specification and design are agreed with you before any hide is cut
4. Production — the suit is cut, stitched and assembled to your figures
5. Delivery — shipped worldwide

Made-to-measure sizing costs no more than a standard size, because every suit is cut to order either way. See how it's made.

Specification Options

• Leather: full-grain cowhide, kangaroo or Monaco hide
• Stretch material: standard Kevlar or Schoeller-Keprotec® upgrade
• Fitting: race, regular or relaxed
• Perforation: none, partial, full or selected panels
• Construction: one piece or two piece with a full 360-degree connecting zip
• Lining: fixed or removable polyester mesh
• Colours: unlimited combinations, any panel
• Logos: leather patchwork or printed
• Personalisation: rider name, race number, team identity or custom text
• Speed hump: none, small, medium or large
• Matching gear: gloves and boots in the same colourway

Size and Fit

Cut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.

A new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.

Frequently Asked Questions

What armour is fitted?
CE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.

Do you ship worldwide?
Yes. Every suit is made to order and shipped worldwide.

Does made to measure cost more?
No. Every suit is cut to order, so a made-to-measure fit is the same price and the same production as a standard size.

Can I have my name and race number?
Yes, in leather patchwork, along with team identity or any custom text.

What if the fit is not right when it arrives?
Get in touch through the contact page with photographs and your measurements and the garment will be assessed for adjustment.

Can you reproduce a design from a photograph?
Yes. Send a reference image and the layout, colours and panel design are reproduced in leather patchwork. Artwork is cut and stitched from coloured hide rather than printed, so it lasts the life of the suit.

Should I choose cowhide or kangaroo?
Kangaroo at 0.8–0.9 mm matches cowhide at 1.3–1.4 mm for abrasion resistance at lower weight, which is why racers use it. Full-grain cowhide is harder wearing and costs less.

Care Instructions

• Clean the exterior with a soft, slightly damp cloth
• Use a leather cleaner and conditioner when required
• Do not machine wash, tumble dry or bleach
• Remove internal armour and lining before deep cleaning
• Dry naturally, away from direct sunlight and artificial heat
• Store on a wide hanger in a cool, dry place