Motorcycle Leather Jacket Unisex Racing Jacket

This motorcycle leather jacket is a racing jacket with CE Level 2 armor. It is made to your size, and the colors and artwork can be changed, or you can send your own design to be reproduced.

Full-grain cowhide with CE Level 2 armor at the shoulders and elbows and a back protector pocket, pre-curved sleeves and black stretch panels along the sleeves and sides for movement on the bars. Made to order in your size or to your own measurements.

Construction

• Full-grain cowhide leather, 1.3–1.4 mm — the dense outer layer of the hide that abrades slowly rather than tearing. Split, bonded and PU-coated leather is never used
• CE Level 2 armor at the shoulders and elbows, with a back protector pocket fitted with a CE Level 2 protector
• Pre-curved sleeves cut for a riding position rather than a standing one
• Triple safety stitching on main seams with high-strength bonded nylon thread
• Black stretch panels on the sleeves and sides for movement on the bars
• Ribbed leather panels at the lower back for fit and flex
• Full interior lining with internal pockets
• YKK zippers throughout
• Graphics produced as leather patchwork rather than print, so they cannot crack, peel or fade
• Can be zipped to matching leather pants where a two piece is specified

Armor Specification

Armor is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armor is independently CE certified; the leather shell is not certified as a garment.

Riders and Bikes

Made for riders of any sport bike, supersport or naked bike, on the road or at track days. It is made for men and women. Any jacket can be produced in a colorway matched to your bike or the rest of your gear.

Size and Fit

Choose your size when you order, or have the jacket made to your own measurements at no change to production. An armored jacket must fit closely so the protectors stay over the shoulder and elbow — a loose jacket lets armor migrate off the joint during a crash. See the size guide.

Frequently Asked Questions

What armor does this jacket use?
CE Level 2 at the shoulders and elbows to EN 1621-1:2012, with a back protector pocket fitted with a CE Level 2 protector to EN 1621-2:2014, certified by Ricotest, Notified Body No. 0498, Italy.

Can I use my own artwork or colors?
Yes. Every jacket is made to order, so you can change the colors or send your own logo or design. See custom motorcycle jackets.

Will the graphics fade or peel?
No. The graphics are leather patchwork, not printed on the surface, so they do not crack, peel or fade.

Is this a men's or women's jacket?
Both. It is cut to your measurements, so it can be made on men's or women's proportions.

What leather is used?
Full-grain cowhide, the dense outer layer of the hide. Split, bonded and PU-coated leather tear rather than abrade and are never used here.

Do you ship worldwide?
Yes. Every jacket is made to order and shipped worldwide.

Care Instructions

• Wipe the exterior with a soft, slightly damp cloth, taking extra care on the white leather
• Use a leather conditioner when the hide feels dry
• Do not machine wash, tumble dry or bleach
• Dry naturally, away from direct sunlight and artificial heat
• Store on a wide hanger so the shoulders keep their shape