{"title":"MotoGP 2026 Leather Racing Suits | Premium Race Leather Collection","description":"\u003cp\u003eShop our \u003cstrong\u003eMotoGP 2026 leather racing suits\u003c\/strong\u003e collection, built from the liveries of the 2026 MotoGP season. Every suit reproduces a rider's team colours, number and sponsor layout in real leather patchwork rather than print, so the design cannot crack, peel or fade, and each one is cut to your own measurements. Suits start at $539.99.\u003c\/p\u003e\n\u003ch2\u003eMotoGP Leathers Made for Track Days and Circuit Riding\u003c\/h2\u003e\n\u003cp\u003eEach suit is made from full-grain cowhide, with kangaroo leather available as an upgrade for riders who want a lighter hide. Construction follows professional race-suit practice: pre-curved sleeves and legs for a natural riding crouch, Kevlar stretch panels at the crotch, calves and underarms, accordion stretch at the lower back and knees, original YKK zippers and triple safety stitching throughout.\u003c\/p\u003e\n\u003ch2\u003eCE Level 2 Armour at Every Impact Point\u003c\/h2\u003e\n\u003cp\u003eProtection comes standard. Removable KeepTech CE Level 2 armour sits at the shoulders, elbows and knees, certified to EN 1621-1, with a Level 2 back protector certified to EN 1621-2 and hip protectors included. The armour is independently tested by Ricotest, European Notified Body No. 0498. Level 2 transmits about 20 kN in the standard impact test, compared with roughly 35 kN for Level 1. Read the full details on our \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eThe 2026 MotoGP Grid in Leather\u003c\/h2\u003e\n\u003cp\u003eThe collection follows the 2026 season across the factories: Marc Marquez and Francesco Bagnaia on Ducati Lenovo, Alex Marquez at Gresini, Morbidelli and Di Giannantonio at VR46, Jorge Martin and Marco Bezzecchi at Aprilia, Quartararo and Rins at Yamaha, Bastianini and Viñales at Red Bull KTM Tech3, and Honda HRC and LCR. It also includes WorldSBK suits and the Valentino Rossi Yamaha GYTR suit. Choose a suit by rider, by team or by bike and match it with gloves and boots in the same colours. New 2026 suits are added as they are finished.\u003c\/p\u003e\n\u003ch2\u003eCustom Sizing for Men and Women\u003c\/h2\u003e\n\u003cp\u003eOrder a standard size (XS to 4XL) or send your measurements for a tailor-made fit at no extra cost. Choose one piece or two piece construction, perforated or solid leather, a race, regular or relaxed fit, and add a rider name, race number or custom text. Every suit is made to order and shipped worldwide. See the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e before you order.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does a MotoGP leather suit cost?\u003c\/strong\u003e\u003cbr\u003eOur 2026 MotoGP suits are priced from $539.99 to $579.99 with CE Level 2 armour included. Kangaroo leather, Schoeller stretch panels and other upgrades are optional.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are MotoGP suits made of?\u003c\/strong\u003e\u003cbr\u003eRace suits are cut from leather, most often kangaroo or cowhide, with stretch panels for movement and armour at the shoulders, elbows, knees, back and hips. Ours use full-grain cowhide as standard, with kangaroo available as an upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy a MotoGP suit for sale in my size?\u003c\/strong\u003e\u003cbr\u003eYes. Every suit is made to order in standard sizes XS to 4XL, or to your own measurements at no extra cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the armour CE Level 2?\u003c\/strong\u003e\u003cbr\u003eYes. Every suit includes CE Level 2 armour at the shoulders, elbows, knees, back and hips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get a 2026 MotoGP suit made to my measurements?\u003c\/strong\u003e\u003cbr\u003eYes. Send your body measurements and the suit is cut to them at no extra cost.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add my name and number?\u003c\/strong\u003e\u003cbr\u003eYes. Rider name, race number, team identity or custom text can be added in leather patchwork or print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the design printed?\u003c\/strong\u003e\u003cbr\u003eNo. Colours and logos are cut and stitched from coloured leather, so they do not crack, peel or fade.\u003c\/p\u003e","products":[{"product_id":"joan-mir-castrol-honda-hrc-2026-motogp-leather-racing-suit","title":"Joan Mir Castrol Honda HRC 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Joan Mir Castrol Honda HRC 2026 MotoGP Leather Racing Suit is finished in the red, navy, white and black Castrol Honda HRC colours Joan Mir races in the 2026 MotoGP season, with the Castrol and Honda panels across the chest, the One HEART and Satu HATI slogans, his number 36 on the lower legs and the MIR 36 name and number on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eCastrol Honda HRC team colours and sponsor panels reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment, shown in fluorescent yellow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Honda CBR1000RR-R Fireblade, CBR600RR, CBR650R and CB1000R, and by Honda owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Ducati Panigale.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Castrol Honda HRC 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do One HEART and Satu HATI mean?\u003c\/strong\u003e\u003cbr\u003eOne HEART is the slogan on the front of the suit and Satu HATI is the same message in Indonesian, which appears on the back and the right sleeve. Both are reproduced in leather patchwork, so the lettering stays sharp rather than peeling like print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Joan Mir?\u003c\/strong\u003e\u003cbr\u003eJoan Mir is a Spanish MotoGP rider who won the 2020 MotoGP World Championship and races with number 36, shown on the lower legs and on the tail of this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match my Honda’s exact red?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Honda racing red is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252198138098,"sku":"BRG-ST-JM-HRC-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Joan-Mir-Castrol-Honda-HRC-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794150622"},{"product_id":"luca-marini-castrol-honda-hrc-2026-motogp-leather-racing-suit","title":"Luca Marini Castrol Honda HRC 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Luca Marini Castrol Honda HRC 2026 MotoGP Leather Racing Suit is finished in the red, navy, white and black Castrol Honda HRC colours Luca Marini races in the 2026 MotoGP season, with the Castrol and Honda panels across the chest, the One HEART and Satu HATI slogans, HONDA lettering on the collar and legs, the VR46 helmet logo on the belly and the MARINI name on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eCastrol Honda HRC team colours and sponsor panels, including Castrol, Honda, HRC, Michelin, Akrapovič, Motul, Yuasa and ShinDengen, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Honda CBR1000RR-R Fireblade, CBR600RR, CBR650R and CB1000R, and by Honda owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Ducati Panigale.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Castrol Honda HRC 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do One HEART and Satu HATI mean?\u003c\/strong\u003e\u003cbr\u003eOne HEART is the slogan on the front of the suit and Satu HATI is the same message in Indonesian, which appears on the back and the right sleeve. Both are reproduced in leather patchwork, so the lettering stays sharp rather than peeling like print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Luca Marini?\u003c\/strong\u003e\u003cbr\u003eLuca Marini is an Italian MotoGP rider, a member of the VR46 Academy and the half-brother of Valentino Rossi. He rides for Honda HRC Castrol in 2026, and the VR46 helmet logo and the MARINI name are both on this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match my Honda’s exact red?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Honda racing red is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252233167090,"sku":"BRG-ST-LM-HRC-2026-001","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Luca-Marini-Castrol-Honda-HRC-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794151500"},{"product_id":"alex-marquez-gresini-ducati-2026-motogp-leather-racing-suit","title":"Alex Marquez Gresini Ducati 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Alex Marquez Gresini Ducati 2026 MotoGP Leather Racing Suit is finished in the light blue, black, yellow and white Gresini Racing colours Alex Marquez races in the 2026 MotoGP season, with the large blue chest panel, the blue and yellow sleeve panels, the Ducati lettering and number 73 on the back, and the ALEX name on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eGresini Racing team colours and sponsor panels, including Michelin, Shoei, Oli, Estrella Galicia, Antangin, Akrapovič and Ducati, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Ducati Panigale V4, Panigale V2 and Streetfighter V4, and by Ducati owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Gresini Racing 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Alex Marquez?\u003c\/strong\u003e\u003cbr\u003eAlex Marquez is a Spanish MotoGP rider, the younger brother of Marc Marquez and a former Moto3 and Moto2 world champion. He rides a Ducati for Gresini Racing with number 73, shown on the back of this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the exact Gresini light blue?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or a colour reference and the leather is dyed to match as closely as hide allows. Pale blue is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252235067634,"sku":"BRG-ST-AM-GRS-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Alex-Marquez-BK8-Gresini-Ducati-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794151668"},{"product_id":"alex-rins-yamaha-factory-racing-2026-motogp-leather-racing-suit","title":"Alex Rins Yamaha Factory Racing 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Alex Rins Yamaha Factory Racing 2026 MotoGP Leather Racing Suit is finished in the blue, black and white Yamaha Factory Racing colours Alex Rins races in the 2026 MotoGP season, with the blue fade across the chest, the white and blue stripe panels at the ribs, YAMAHA lettering on both sleeves and the back, his number 42 repeated down the sleeves and the 42ins logo on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eYamaha Factory Racing team colours and sponsor panels, including Yamaha, Yamalube, Michelin, Eneos, Akrapovič, Scorpion EXO and DP World, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Yamaha R1, R1M, R6 and R7, and by Yamaha owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Kawasaki Ninja ZX-10R, Suzuki GSX-R, Honda CBR1000RR-R, Aprilia RSV4 and Ducati Panigale.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Yamaha Factory Racing 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Alex Rins?\u003c\/strong\u003e\u003cbr\u003eAlex Rins is a Spanish MotoGP rider who has won premier-class races with Suzuki and Honda and rides number 42 for Yamaha Factory Racing. His number runs down both sleeves of this suit and the 42ins logo is on the tail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match my Yamaha’s exact blue?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Yamaha racing blue is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252278943986,"sku":"BRG-ST-AR-YMH-2026-001","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Alex-Rins-Yamaha-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794153421"},{"product_id":"enea-bastianini-red-bull-ktm-tech3-2026-motogp-leather-racing-suit","title":"Enea Bastianini Red Bull KTM Tech3 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Enea Bastianini Red Bull KTM Tech3 2026 MotoGP Leather Racing Suit is finished in the navy, orange and black Red Bull KTM Tech3 colours Enea Bastianini races in the 2026 MotoGP season, with the twin Red Bull bulls across the chest, KTM lettering, Red Bull running down both legs, orange back and knee panels, and the pink Bestia logo on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eRed Bull KTM Tech3 team colours and sponsor panels, including Red Bull, KTM, Tech3, Motul, Michelin, Akrapovič, KYT and WP, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the KTM 1390 Super Duke R, 990 Duke and RC 8C, and by KTM owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Ducati Panigale, Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Red Bull KTM Tech3 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Enea Bastianini?\u003c\/strong\u003e\u003cbr\u003eEnea Bastianini is an Italian MotoGP rider known as La Bestia, “the Beast”, which is the Bestia logo on the tail of this suit. He won the 2020 Moto2 World Championship, has won MotoGP races on a Ducati and rides a KTM for Red Bull KTM Tech3 with number 23.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the exact KTM orange?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. KTM orange is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252350574834,"sku":"BRG-ST-EB-KTM-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Enea-Bastianini-Red-Bull-KTM-Tech3-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794153624"},{"product_id":"fabio-di-giannantonio-pertamina-enduro-vr46-ducati-2026-motogp-leather-racing-suit","title":"Fabio Di Giannantonio Pertamina Enduro VR46 Ducati 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Fabio Di Giannantonio Pertamina Enduro VR46 Ducati 2026 MotoGP Leather Racing Suit is finished in the fluorescent yellow, black and red Pertamina Enduro VR46 Racing Team colours Fabio Di Giannantonio races in the 2026 MotoGP season, with the red Pertamina Enduro chest panel, the VR46 Racing Team banner, Enduro lettering down both arms and legs, the VR46 helmet logo on the belly and the DIGGIA name on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003ePertamina Enduro VR46 Racing Team colours and sponsor panels, including Pertamina Enduro, VR46, Ducati, Michelin, Shoei, Comoli Ferrari, Akrapovič, Cupra and HDI, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Ducati Panigale V4, Panigale V2 and Streetfighter V4, and by Ducati owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Pertamina Enduro VR46 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Fabio Di Giannantonio?\u003c\/strong\u003e\u003cbr\u003eFabio Di Giannantonio, nicknamed Diggia, is an Italian MotoGP rider who has won MotoGP races on a Ducati. He races for the Pertamina Enduro VR46 Racing Team with number 49, and the DIGGIA name is on the tail of this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the exact VR46 fluorescent yellow?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or a colour reference and the leather is dyed to match as closely as hide allows. Fluorescent yellow is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252360339698,"sku":"BRG-ST-FDG-VR46-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Fabio-Di-Giannantonio-Pertamina-Enduro-VR46-Ducati-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794153855"},{"product_id":"fabio-quartararo-yamaha-factory-racing-2026-motogp-leather-racing-suit","title":"Fabio Quartararo Yamaha Factory Racing 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Fabio Quartararo Yamaha Factory Racing 2026 MotoGP Leather Racing Suit is finished in the blue, black, red and white Yamaha Factory Racing colours Fabio Quartararo races in the 2026 MotoGP season, with the blue fade across the chest, YAMAHA lettering on both sleeves and the back, the red graphic sleeve panels, red lower legs and the El Diablo logo on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eYamaha Factory Racing team colours and sponsor panels, including Yamaha, Yamalube, Michelin, Eneos, Akrapovič, HJC and DP World, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Yamaha R1, R1M, R6 and R7, and by Yamaha owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Kawasaki Ninja ZX-10R, Suzuki GSX-R, Honda CBR1000RR-R, Aprilia RSV4 and Ducati Panigale.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Yamaha Factory Racing 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Fabio Quartararo?\u003c\/strong\u003e\u003cbr\u003eFabio Quartararo is a French MotoGP rider nicknamed El Diablo, which is the logo on the tail of this suit. He won the 2021 MotoGP World Championship and rides number 20 for Yamaha Factory Racing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match my Yamaha’s exact blue?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Yamaha racing blue is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252361126130,"sku":"BRG-ST-FQ-YMH-2026-001","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Fabio-Quartararo-Yamaha-Factory-Racing-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794153951"},{"product_id":"francesco-bagnaia-ducati-lenovo-2026-motogp-leather-racing-suit","title":"Francesco Bagnaia Ducati Lenovo 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Francesco Bagnaia Ducati Lenovo 2026 MotoGP Leather Racing Suit is finished in the red, black and white Ducati Lenovo Team colours Francesco “Pecco” Bagnaia races in the 2026 MotoGP season, with the Lenovo and NetApp panels across the chest, the Ducati 100 anniversary logo, Ducati lettering down both legs, red and white camouflage sleeve panels and the GOFREE logo on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDucati Lenovo Team colours and sponsor panels, including Lenovo, NetApp, Motorola, TIM, Shell, Riello, Frecciarossa, Michelin, Akrapovič, HJC and Unipol, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Ducati Panigale V4, Panigale V2 and Streetfighter V4, and by Ducati owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Ducati Lenovo 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Francesco Bagnaia?\u003c\/strong\u003e\u003cbr\u003eFrancesco “Pecco” Bagnaia is an Italian MotoGP rider who won the 2022 and 2023 MotoGP World Championships on a Ducati and rides number 63 for the Ducati Lenovo Team. GOFREE is his logo, shown on the tail of this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match my Ducati’s exact red?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Ducati red is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252379214066,"sku":"BRG-ST-FB-DUC-2026-001","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Francesco-Bagnaia-Ducati-Lenovo-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794154463"},{"product_id":"franco-morbidelli-pertamina-enduro-vr46-ducati-2026-motogp-leather-racing-suit","title":"Franco Morbidelli Pertamina Enduro VR46 Ducati 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Franco Morbidelli Pertamina Enduro VR46 Ducati 2026 MotoGP Leather Racing Suit is finished in the fluorescent yellow, black and red Pertamina Enduro VR46 Racing Team colours Franco Morbidelli races in the 2026 MotoGP season, with a split yellow and black body, red Pertamina Enduro panels across the chest, arms and legs, the VR46 Racing Team banner, Ducati lettering on the back, the VR46 helmet logo, MORBIDELLI across the tail and the number 21 on the lower leg.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003ePertamina Enduro VR46 Racing Team colours and sponsor panels, including Pertamina Enduro, Comoli Ferrari, Barracuda, Lino Sonego, Michelin, Cupra, Akrapovič, Ercos and Hero, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Ducati Panigale V4, Panigale V2 and Streetfighter V4, and by Ducati and VR46 fans who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Pertamina Enduro VR46 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Franco Morbidelli?\u003c\/strong\u003e\u003cbr\u003eFranco Morbidelli is an Italian MotoGP rider, the 2017 Moto2 World Champion and 2020 MotoGP runner-up, who rides number 21 for the Pertamina Enduro VR46 Racing Team on a Ducati.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the fluorescent yellow?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or reference and the leather is dyed to match as closely as hide allows. Fluorescent yellow is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252380426482,"sku":"BRG-ST-FM-VR46-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Franco-Morbidelli-Pertamina-Enduro-VR46-Ducati-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794154823"},{"product_id":"jack-miller-prima-pramac-yamaha-2026-motogp-leather-racing-suit","title":"Jack Miller Prima Pramac Yamaha 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Jack Miller Prima Pramac Yamaha 2026 MotoGP Leather Racing Suit is finished in the purple, navy and red Prima Pramac Yamaha colours Jack Miller races in the 2026 MotoGP season, with the large Prima and Alpine lettering down the chest, Pramac and Yamaha branding, red shoulder and knee panels, purple striped legs and MILLER across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003ePrima Pramac Yamaha colours and sponsor panels, including Prima, Alpine, Pramac, Yamaha, Michelin, FIAMM, Z1.com, Motul, Akrapovič and Corpay, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Yamaha R1, R6 and R7, and by Yamaha owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Prima Pramac Yamaha 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Jack Miller?\u003c\/strong\u003e\u003cbr\u003eJack Miller is an Australian MotoGP rider who races number 43 and rides a Yamaha for the Prima Pramac Yamaha team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the Pramac purple?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or reference and the leather is dyed to match as closely as hide allows. Purple and navy are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252384194802,"sku":"BRG-ST-JM-YAM-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Jack-Miller-Prima-Pramac-Yamaha-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794155172"},{"product_id":"marc-marquez-ducati-lenovo-2026-motogp-leather-racing-suit","title":"Marc Marquez Ducati Lenovo 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Marc Marquez Ducati Lenovo 2026 MotoGP Leather Racing Suit is finished in the red, white and black Ducati Lenovo Team colours Marc Marquez races in the 2026 MotoGP season, with the Lenovo and NetApp panels across the chest, red and white striped sleeves and thighs, Ducati lettering down both legs, the Ducati 100 anniversary logo and MARC across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDucati Lenovo Team colours and sponsor panels, including Lenovo, NetApp, Frecciarossa, Motorola, TIM, Michelin, Eataly, Shell, Riello, Audi Sport, SAP, aruba.it, Akrapovič, Unipol and Estrella Galicia 0.0, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Ducati Panigale V4, Panigale V2 and Streetfighter V4, and by Ducati owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Ducati Lenovo 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Marc Marquez?\u003c\/strong\u003e\u003cbr\u003eMarc Marquez is a Spanish MotoGP rider and multiple-time MotoGP World Champion who races number 93 for the Ducati Lenovo Team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match my Ducati’s exact red?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Ducati red is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252405297394,"sku":"BRG-ST-MM-DUC-2026-001","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Marc-Marquez-Ducati-Lenovo-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794155728"},{"product_id":"maverick-vinales-red-bull-ktm-tech3-2026-motogp-leather-racing-suit","title":"Maverick Viñales Red Bull KTM Tech3 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Maverick Viñales Red Bull KTM Tech3 2026 MotoGP Leather Racing Suit is finished in the navy, orange and black Red Bull KTM Tech3 colours Maverick Viñales races in the 2026 MotoGP season, with the twin Red Bull bulls and large Red Bull and KTM lettering across the chest, orange side panels and lower legs, Red Bull lettering down both thighs, the Tech3 logo on the back and MAVERICK across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eRed Bull KTM Tech3 colours and sponsor panels, including Red Bull, KTM, Tech3, Motul, Michelin, Akrapovič, WP and Arai, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the KTM RC 390, RC 8C and 1390 Super Duke R, and by KTM owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Ducati Panigale V4, Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R and Aprilia RSV4.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Red Bull KTM Tech3 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Maverick Viñales?\u003c\/strong\u003e\u003cbr\u003eMaverick Viñales is a Spanish MotoGP rider and the 2013 Moto3 World Champion who races number 12 and rides a KTM for the Red Bull KTM Tech3 team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match KTM orange?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. KTM orange and navy are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252407460082,"sku":"BRG-ST-MV-KTM-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Maverick-Vinales-Red-Bull-KTM-Tech3-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794155906"},{"product_id":"toprak-razgatlioglu-prima-pramac-yamaha-2026-motogp-leather-racing-suit","title":"Toprak Razgatlioğlu Prima Pramac Yamaha 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Toprak Razgatlioğlu Prima Pramac Yamaha 2026 MotoGP Leather Racing Suit is finished in the purple, navy and red Prima Pramac Yamaha colours Toprak Razgatlioğlu races in the 2026 MotoGP season, with the large Prima and Alpine lettering down the chest, Pramac and Yamaha branding, red shoulder and knee panels, purple striped legs and the EL TURCO name across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003ePrima Pramac Yamaha colours and sponsor panels, including Prima, Alpine, Pramac, Yamaha, Michelin, FIAMM, EAE, Z1.com, Motul, Akrapovič and Corpay, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Yamaha R1, R6 and R7, and by Yamaha owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Prima Pramac Yamaha 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Toprak Razgatlioğlu?\u003c\/strong\u003e\u003cbr\u003eToprak Razgatlioğlu, nicknamed El Turco, is a Turkish rider and multiple-time World Superbike Champion who rides a Yamaha for the Prima Pramac Yamaha MotoGP team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the Pramac purple?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or reference and the leather is dyed to match as closely as hide allows. Purple and navy are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252411982066,"sku":"BRG-ST-TR-YAM-2026-001","price":569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Toprak-Razgatlioglu-Prima-Pramac-Yamaha-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794156016"},{"product_id":"garrett-gerloff-kawasaki-worldsbk-team-2026-leather-racing-suit","title":"Garrett Gerloff Kawasaki WorldSBK Team 2026 Leather Racing Suit","description":"\u003cp\u003eThe Garrett Gerloff Kawasaki WorldSBK Team 2026 Leather Racing Suit is finished in the Kawasaki green, black, white and light blue World Superbike team colours, with the Kawasaki WorldSBK Team panel across the chest, Ninja and Z80 Group lettering, CISA SBK branding, Kawasaki lettering down both arms and legs, the Ninja ZX-10R name on the back and a Texas licence plate reading G3R10FF across the lower back.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eKawasaki WorldSBK Team colours and sponsor panels, including Kawasaki, Ninja, Z80 Group, CISA, Pirelli, HJC, Akrapovič, Soverini, Cittadella, Petroli Firenze, Soprema and Puccetti, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Kawasaki Ninja ZX-10R, ZX-6R and ZX-4RR, and by Kawasaki owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Kawasaki WorldSBK 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, licence plate, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Garrett Gerloff?\u003c\/strong\u003e\u003cbr\u003eGarrett Gerloff is an American rider from Texas who competes in the World Superbike Championship on a Kawasaki Ninja ZX-10R.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match Kawasaki green?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Kawasaki green is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252422303986,"sku":"BRG-ST-GG-KAW-2026-001","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Garrett-Gerloff-Kawasaki-WorldSBK-Team-2026-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794156312"},{"product_id":"johann-zarco-lcr-honda-castrol-2026-motogp-leather-racing-suit","title":"Johann Zarco LCR Honda Castrol 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Johann Zarco LCR Honda Castrol 2026 MotoGP Leather Racing Suit is finished in the green, white, red and black Castrol colours Johann Zarco races in the 2026 MotoGP season, with the large Castrol Power1 and Honda lettering across the chest, a black GOD55 Sports belly panel, red shoulders, green zigzag edging, Castrol lettering down both thighs and ZARCO across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eLCR Honda Castrol colours and sponsor panels, including Castrol Power1, Honda, HRC, GOD55 Sports, Shark, Michelin, bp ultimate, April Moto, Akrapovič, Agos, Draco, Beta, GIVI, Quad Lock and Piolanti Truck, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Honda CBR1000RR-R Fireblade, CBR600RR and CBR500R, and by Honda owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R and Aprilia RSV4.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e LCR Honda Castrol 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Johann Zarco?\u003c\/strong\u003e\u003cbr\u003eJohann Zarco is a French MotoGP rider and two-time Moto2 World Champion (2015 and 2016) who races number 5 and rides a Honda for the LCR Honda Castrol team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the Castrol green and red?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or reference and the leather is dyed to match as closely as hide allows. Castrol green and red are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252422566130,"sku":"BRG-ST-JZ-HON-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Johann-Zarco-LCR-Honda-Castrol-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794156416"},{"product_id":"danilo-petrucci-rokit-bmw-worldsbk-team-2026-leather-racing-suit","title":"Danilo Petrucci ROKiT BMW WorldSBK Team 2026 Leather Racing Suit","description":"\u003cp\u003eThe Danilo Petrucci ROKiT BMW WorldSBK Team 2026 Leather Racing Suit is finished in the black, white, red and light blue BMW Motorsport team colours, with the BMW and ROKiT branding across the chest, ROKiT Oxygen, ROKiT Off, OUTDO and Champion Lubricants sponsor panels, BMW M-colour stripes down the arms and legs, the SBK mark on the sleeves and the Petrux name across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eROKiT BMW WorldSBK Team colours and sponsor panels, including BMW, ROKiT, ROKiT Oxygen, ROKiT Off, OUTDO, Champion Lubricants, Pirelli, Arai, EBC Group, Akrapovič and SMR, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the BMW S 1000 RR and M 1000 RR, and by BMW owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e ROKiT BMW WorldSBK 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Danilo Petrucci?\u003c\/strong\u003e\u003cbr\u003eDanilo Petrucci, nicknamed Petrux, is an Italian rider who competes in the World Superbike Championship for the ROKiT BMW team on the BMW M 1000 RR.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the BMW Motorsport colours?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. The BMW M light blue and red are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252425777394,"sku":"BRG-ST-DP-BMW-2026-001","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Danilo-Petrucci-ROKiT-BMW-WorldSBK-Team-2026-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794156760"},{"product_id":"jorge-martin-aprilia-racing-2026-motogp-leather-racing-suit","title":"Jorge Martin Aprilia Racing 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Jorge Martin Aprilia Racing 2026 MotoGP Leather Racing Suit is finished in the black, purple, red and white Aprilia Racing team colours, with the Aprilia Racing and Sterilgarda chest panels, purple and red zig-zag side panels, Piaggio Group, Michelin, Castrol, Dell'Orto, BS Battery, SC-Project and Green Power sponsor logos, aprilia lettering down both legs and the Martinator name across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eAprilia Racing MotoGP colours and sponsor panels, including Aprilia Racing, Sterilgarda, Piaggio Group, Michelin, Castrol, Dell'Orto, BS Battery, SC-Project, PAN, Green Power, RBF, Lifenet.it, FES and Targa, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Aprilia RSV4, RS 660 and Tuono V4, and by Aprilia owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, BMW S 1000 RR and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Aprilia Racing 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Jorge Martin?\u003c\/strong\u003e\u003cbr\u003eJorge Martin, nicknamed Martinator, is a Spanish MotoGP rider and the 2024 MotoGP World Champion, riding for Aprilia Racing in 2026.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match Aprilia purple?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. The Aprilia Racing purple and red accents are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252429840626,"sku":"BRG-ST-JM-APR-2026-001","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Jorge-Martin-Aprilia-Racing-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794157025"},{"product_id":"marco-bezzecchi-aprilia-racing-2026-motogp-leather-racing-suit","title":"Marco Bezzecchi Aprilia Racing 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Marco Bezzecchi Aprilia Racing 2026 MotoGP Leather Racing Suit is finished in the black, red, blue and white Aprilia Racing team colours, with the Aprilia Racing and Sterilgarda chest panels, red and blue dotted side panels, Piaggio Group, Michelin, Castrol, Dell'Orto, BS Battery, SC-Project and Green Power sponsor logos, aprilia lettering down both legs and the Simply the Bez logo across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eAprilia Racing MotoGP colours and sponsor panels, including Aprilia Racing, Sterilgarda, Piaggio Group, Michelin, Castrol, Dell'Orto, BS Battery, SC-Project, PAN, Green Power, RBF, Lifenet.it, FES and Targa, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Aprilia RSV4, RS 660 and Tuono V4, and by Aprilia owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, BMW S 1000 RR and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Aprilia Racing 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Marco Bezzecchi?\u003c\/strong\u003e\u003cbr\u003eMarco Bezzecchi, nicknamed Bez, is an Italian MotoGP rider from Rimini who rides for Aprilia Racing in 2026.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match Aprilia red and blue?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. The Aprilia Racing red and blue accents are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252464804082,"sku":"BRG-ST-MB-APR-2026-001","price":559.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Marco-Bezzecchi-Aprilia-Racing-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794157306"},{"product_id":"diogo-moreira-pro-honda-lcr-2026-motogp-leather-racing-suit","title":"Diogo Moreira Pro Honda LCR 2026 MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Diogo Moreira Pro Honda LCR 2026 MotoGP Leather Racing Suit is finished in the red, black, white, indigo and fluorescent yellow Pro Honda LCR team colours, with the Pro Honda and Honda Asas da Liberdade chest panel, Astemo and GOD55 Sports branding, HRC, Michelin, KYT, GIVI, Estrella Galicia 0,0, Agos, Akrapovič, Draco and Malvi Garlic sponsor logos, the Brazilian flag across the upper back and the Diogo name across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003ePro Honda LCR MotoGP colours and sponsor panels, including Pro Honda, Honda, Astemo, GOD55 Sports, HRC, Michelin, KYT, GIVI, Estrella Galicia 0,0, Agos, Akrapovič, Draco, Malvi Garlic, Beta and RBP, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Honda CBR1000RR-R Fireblade, CBR600RR and CBR650R, and by Honda owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, BMW S 1000 RR and Aprilia RSV4.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Pro Honda LCR 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Diogo Moreira?\u003c\/strong\u003e\u003cbr\u003eDiogo Moreira is a Brazilian rider who competes in MotoGP in 2026 with the Pro Honda LCR team on the Honda RC213V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match Honda red?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. Honda red and the fluorescent yellow accents are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252492001522,"sku":"BRG-ST-DM-HON-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Diogo-Moreira-Pro-Honda-LCR-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794157491"},{"product_id":"alex-lowes-bimota-kawasaki-worldsbk-team-2026-leather-racing-suit","title":"Alex Lowes Bimota Kawasaki WorldSBK Team 2026 Leather Racing Suit","description":"\u003cp\u003eThe Alex Lowes Bimota Kawasaki WorldSBK Team 2026 Leather Racing Suit is finished in the white, red, green and black Bimota by Kawasaki Racing Team colours, with the Bimota and Kawasaki chest panel, Motul branding, Showa lettering down both legs, Bimota Kawasaki lettering down both sleeves, Pirelli, Akrapovič, Arai, J.Juan, Bonagapion, CMS and GA·BE Solutions sponsor logos, the BbK Racing Team panel, the number 22 at the collar and the Lowes heart logo across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eBimota by Kawasaki Racing Team colours and sponsor panels, including Bimota, Kawasaki, Motul, Showa, Pirelli, Akrapovič, Arai, J.Juan, Bonagapion, CMS and GA·BE Solutions, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Bimota KB998 Rimini and Kawasaki Ninja ZX-10R, ZX-6R and ZX-4RR, and by Kawasaki and Bimota owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Suzuki GSX-R, Aprilia RSV4, BMW S 1000 RR and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Bimota by Kawasaki Racing Team 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Alex Lowes?\u003c\/strong\u003e\u003cbr\u003eAlex Lowes is a British rider who competes in the World Superbike Championship with the Bimota by Kawasaki Racing Team and races with the number 22.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match Bimota and Kawasaki green?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. The green, red and white of the Bimota by Kawasaki scheme are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252505010418,"sku":"BRG-ST-AL-BIM-2026-001","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Alex-Lowes-Bimota-Kawasaki-WorldSBK-Team-2026-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794157583"},{"product_id":"axel-bassani-bimota-kawasaki-worldsbk-team-2026-leather-racing-suit","title":"Axel Bassani Bimota Kawasaki WorldSBK Team 2026 Leather Racing Suit","description":"\u003cp\u003eThe Axel Bassani Bimota Kawasaki WorldSBK Team 2026 Leather Racing Suit is finished in the white, red, green and black Bimota by Kawasaki Racing Team colours, with the Bimota and Kawasaki chest panel, Motul branding, Showa lettering down both legs, Bimota Kawasaki lettering down both sleeves, Pirelli, Akrapovič, J.Juan, KYT, Juta, D30, Inmotion and CMS sponsor logos, the BbK Racing Team panel and the El Bocia name with claw logo across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eBimota by Kawasaki Racing Team colours and sponsor panels, including Bimota, Kawasaki, Motul, Showa, Pirelli, Akrapovič, J.Juan, KYT, Juta, D30, Inmotion and CMS, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Bimota KB998 Rimini and Kawasaki Ninja ZX-10R, ZX-6R and ZX-4RR, and by Kawasaki and Bimota owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Ducati Panigale V4, Suzuki GSX-R, Aprilia RSV4, BMW S 1000 RR and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Bimota by Kawasaki Racing Team 2026 scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Axel Bassani?\u003c\/strong\u003e\u003cbr\u003eAxel Bassani, nicknamed El Bocia, is an Italian rider who competes in the World Superbike Championship with the Bimota by Kawasaki Racing Team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match Bimota and Kawasaki green?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the paint reference and the leather is dyed to match as closely as hide allows. The green, red and white of the Bimota by Kawasaki scheme are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252528767218,"sku":"BRG-ST-AB-BIM-2026-001","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Axel-Bassani-Bimota-Kawasaki-WorldSBK-Team-2026-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794157976"},{"product_id":"fabio-quartararo-yamaha-factory-racing-2026-pink-and-yellow-motogp-leather-racing-suit","title":"Fabio Quartararo Yamaha Factory Racing 2026 Pink and Yellow MotoGP Leather Racing Suit","description":"\u003cp\u003eThe Fabio Quartararo Yamaha Factory Racing 2026 Pink and Yellow MotoGP Leather Racing Suit is finished in black with neon pink, fluorescent yellow and light blue graphics, with hand-drawn sun, rose, skull, butterfly and flower artwork, YAMAHA lettering down both sleeves, Yamaha Factory Racing, Yamalube, ENEOS, Semakin Di Depan, Akrapovič, Blu Cru, DP World, HJC and Michelin sponsor logos, and the El Diablo name with a pink heart across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It is the special-edition artwork livery, a different design from the blue, black and red Yamaha Factory Racing suit, made for riders who want the most colourful Quartararo suit available.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eYamaha Factory Racing MotoGP colours and sponsor panels, including Yamaha, Yamalube, ENEOS, Semakin Di Depan, Akrapovič, Blu Cru, DP World, HJC, Michelin and MotoGP, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Yamaha YZF-R1, R6, R7 and MT-09, and by Yamaha owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Ducati Panigale V4, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4, BMW S 1000 RR and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Yamaha Factory Racing 2026 pink and yellow scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Fabio Quartararo?\u003c\/strong\u003e\u003cbr\u003eFabio Quartararo, nicknamed El Diablo, is a French MotoGP rider who rides for Yamaha Factory Racing and won the MotoGP World Championship in 2021.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the blue Quartararo suit?\u003c\/strong\u003e\u003cbr\u003eThe blue suit follows the standard Yamaha Factory Racing scheme in blue, black, red and white. This one is the pink and yellow artwork edition, with hand-drawn sun, rose, skull and butterfly graphics and the pink heart on the tail. Both are made to measure with the same CE Level 2 armour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the neon pink and yellow?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the colour reference and the leather is dyed to match as closely as hide allows. Fluorescent pink and yellow are hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252533846258,"sku":"BRG-ST-FQ-YMH-2026-002","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Fabio-Quartararo-Yamaha-Factory-Racing-2026-Pink-Yellow-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794157843"},{"product_id":"valentino-rossi-yamaha-gytr-r1-leather-racing-suit","title":"Valentino Rossi Yamaha GYTR Leather Racing Suit","description":"\u003cp\u003eThe Valentino Rossi Yamaha GYTR Leather Racing Suit is finished in the navy, fluorescent yellow, white and black colours of The Doctor's Yamaha GYTR R1 look, with YAMAHA GYTR lettering across the chest, the R1 logos on the sleeves and legs, the VR46 and VR Equipment branding, D.I.D and AGU sponsor logos, and the number 46 with THE DOCTOR across the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It suits track days, circuit riding, fast road use and collectors who want the livery made properly rather than printed onto a thin shell.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eYamaha GYTR R1 colours and sponsor panels, including YAMAHA GYTR, R1, VR46, VR Equipment, D.I.D and AGU, reproduced in leather patchwork, cut and stitched from coloured hide so the design cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Yamaha YZF-R1, R1M, R6 and R7, and by Yamaha owners who want a suit that matches the bike. The cut suits a sportbike riding position and works equally on Ducati Panigale, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and Honda CBR1000RR-R.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Yamaha GYTR navy and yellow scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Valentino Rossi?\u003c\/strong\u003e\u003cbr\u003eValentino Rossi, nicknamed The Doctor, is an Italian motorcycle racer who raced with number 46 and won nine Grand Prix world championships, seven of them in the premier class. The number 46 and THE DOCTOR are on the tail of this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you match the exact navy and fluorescent yellow?\u003c\/strong\u003e\u003cbr\u003eYes. Send a photograph or the colour reference and the leather is dyed to match as closely as hide allows. Fluorescent yellow is hard to reproduce in generic coloured leather, which is why custom matching is offered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252546494706,"sku":"BRG-ST-VR-YMH-001","price":559.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Valentino-Rossi-Yamaha-GYTR-R1-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794158233"},{"product_id":"fabio-di-giannantonio-vr46-ducati-graffiti-2026-leather-racing-suit","title":"Fabio Di Giannantonio VR46 Ducati Graffiti Leather Racing Suit","description":"\u003cp\u003eThe Fabio Di Giannantonio VR46 Ducati Graffiti Leather Racing Suit is the special-edition street-art livery of the Pertamina Enduro VR46 Racing Team, finished in fluorescent yellow, red, black and sky blue with a US-flag chest panel, a hand-drawn graffiti pattern across the belly, legs and back, checkered-flag artwork, helmet illustrations, the green number 21 on the hip and the DIGGIA name on the tail.\u003c\/p\u003e\n\n\u003cp\u003eThis suit reproduces that design in full-grain cowhide, cut to your own measurements, with CE Level 2 armour at the shoulders, elbows, knees and back. It is a different design from the standard Pertamina Enduro VR46 suit, made for riders who want the loudest livery on the grid.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eSpecial-edition graffiti artwork with Pertamina Enduro, VR46 Racing Team, Ducati, Michelin, Shoei, Comoli Ferrari, Barracuda, Lino Sonego, Akrapovič, Cupra, Hero, Ercos and Turbo logos, reproduced in leather patchwork and graphics so the design holds its colour\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling for a natural riding position\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eHip protectors included\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets for phone, wallet and small essentials\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHips\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. Read the full details on the \u003ca href=\"\/en-nl\/pages\/protection-safety\"\u003eprotection and safety page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRiders and Bikes\u003c\/h3\u003e\n\u003cp\u003eMost often ordered by riders on the Ducati Panigale V4, Panigale V2 and Streetfighter V4. The cut suits a sportbike riding position and works equally on Yamaha R1 and R7, Kawasaki Ninja ZX-10R, Suzuki GSX-R, Aprilia RSV4 and BMW S 1000 RR.\u003c\/p\u003e\n\n\u003ch3\u003eAdditional Customization\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather options:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e non-perforated, fully perforated, partially perforated or selective panel ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece suit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside lining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e graffiti yellow, red and blue scheme or fully custom combinations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, racing number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e optional small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching equipment:\u003c\/strong\u003e matching gloves, boots and leather accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom fitting:\u003c\/strong\u003e standard sizing and tailor-made measurements for men and women\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Review the full size chart before selecting a standard size, or send your body measurements for the tailor-made option at no extra cost.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature, not a preference: a loose suit lets armour migrate off the joint it protects during a crash. Riders wanting more room through the chest, waist or legs should choose a regular or relaxed fit rather than a race fit.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour does this suit use?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at every position — back to EN 1621-2:2014, and shoulders, elbows, knees and hips to EN 1621-1:2012 — tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is Fabio Di Giannantonio?\u003c\/strong\u003e\u003cbr\u003eFabio Di Giannantonio, nicknamed Diggia, is an Italian MotoGP rider who races for the Pertamina Enduro VR46 Racing Team with number 49, and the DIGGIA name is on the tail of this suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from the standard Di Giannantonio suit?\u003c\/strong\u003e\u003cbr\u003eThe standard suit uses the plain fluorescent yellow, black and red team scheme. This one is the graffiti special edition, with the street-art pattern, US-flag chest panel and checkered-flag artwork. Both are made to measure with the same CE Level 2 armour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo leather?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm gives comparable abrasion resistance to cowhide at 1.3–1.4 mm for noticeably less weight, which is why most professional racers use it. Full-grain cowhide is harder wearing over many seasons and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Level 1 and Level 2 armour?\u003c\/strong\u003e\u003cbr\u003eThe rating measures how much force passes through the protector in a controlled impact test. Level 2 transmits about 20 kN, Level 1 about 35 kN. Less transmitted force means less energy reaching bone and joint. Every protector in this suit is Level 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose perforated leather?\u003c\/strong\u003e\u003cbr\u003ePerforated leather ventilates far better in heat but slightly reduces abrasion resistance in the perforated panels. Partial perforation — vented chest and leg panels with solid leather over the impact zones — is the usual compromise for hot-weather riding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I am between two standard sizes?\u003c\/strong\u003e\u003cbr\u003eThat is the single best reason to send your measurements instead. Standard sizing forces a compromise at the chest, waist or inseam; a suit cut to your figures does not. Full instructions are in the \u003ca href=\"\/en-nl\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a suitable leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":69252596269298,"sku":"BRG-ST-FD-DUC-2026-002","price":569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Fabio-Di-Giannantonio-VR46-Ducati-Graffiti-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794159224"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/collections\/Marc-Marquez-Ducati-Lenovo-2026-MotoGP-Leather-Racing-Suit-Front-And-Back-View.jpg?v=1794159453","url":"https:\/\/bleedracinggears.com\/en-nl\/collections\/2026-motogp-racing-suits.oembed","provider":"Bleed Racing Gears","version":"1.0","type":"link"}