{"title":"2 Piece Motorcycle Leather Suits | Jacket \u0026 Pants Sets","description":"\u003cp\u003eA two piece motorcycle leather suit is a matched jacket and trouser set joined by a connecting zip at the waist. It gives close to the protection of a one piece with far more practicality off the bike — the jacket can be worn on its own, and the two halves are easier to get in and out of at a fuel stop. Every set here is full-grain cowhide 1.3–1.4 mm, triple stitched with bonded nylon thread, fitted with CE Level 2 armour at the shoulders, elbows, knees and back, and made to your measurements for worldwide delivery in 19 to 28 business days.\u003c\/p\u003e \u003ch2\u003e2 Piece or 1 Piece?\u003c\/h2\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003e2 Piece Suit\u003c\/th\u003e\n\u003cth\u003e1 Piece Suit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eJacket and trousers joined by a zip\u003c\/td\u003e\n\u003ctd\u003eSingle sealed garment\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eOff the bike\u003c\/td\u003e\n\u003ctd\u003eJacket wearable alone\u003c\/td\u003e\n\u003ctd\u003eMust be removed fully\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eTrack eligibility\u003c\/td\u003e\n\u003ctd\u003eNeeds a full 360-degree zip at most circuits\u003c\/td\u003e\n\u003ctd\u003eAccepted everywhere\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eSlide protection\u003c\/td\u003e\n\u003ctd\u003eDepends on the connecting zip\u003c\/td\u003e\n\u003ctd\u003eNo waist seam to separate\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eSport touring, commuting, mixed riding\u003c\/td\u003e\n\u003ctd\u003eRacing, track days\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eThe connecting zip is the part that matters. A short zip at the back only will let the jacket ride up in a slide and expose skin at the waist. Every two piece suit here uses a full 360-degree zip that runs right around the waist, which is also what most circuits require for track use. If you ride primarily on track, see \u003ca href=\"\/en-ca\/collections\/1-piece-motorbike-suits\"\u003e1 piece race suits\u003c\/a\u003e.\u003c\/p\u003e \u003ch2\u003eArmour\u003c\/h2\u003e \u003ctable\u003e \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/tbody\u003e\n\u003c\/table\u003e \u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1.\u003c\/p\u003e \u003cp\u003ePlease note: the armour is independently CE certified. The leather shell is not certified as a garment.\u003c\/p\u003e \u003ch2\u003eLeather and Fit\u003c\/h2\u003e \u003cp\u003eFull-grain cowhide at 1.3–1.4 mm is used throughout — the dense outer layer of the hide that resists abrasion rather than tearing. Bonded and PU-coated leathers are never used. Stretch panels sit at the crotch, calves and underarms, with accordion leather at the lower back.\u003c\/p\u003e \u003cp\u003eFit matters more on a two piece than a one piece, because the jacket must stay connected and the armour must stay over the joint. Every set is cut to your own measurements at no extra time — see the \u003ca href=\"\/en-ca\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e.\u003c\/p\u003e \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3\u003eCan I use a 2 piece suit on a track day?\u003c\/h3\u003e\n\u003cp\u003eUsually yes, provided the jacket and trousers join with a full 360-degree connecting zip, which these do. A minority of circuits require a one piece regardless. Check your circuit's technical regulations before the day.\u003c\/p\u003e \u003ch3\u003eHow safe is a 2 piece compared with a 1 piece?\u003c\/h3\u003e\n\u003cp\u003eWith a full 360-degree zip the difference is small at road speeds. At sustained racing speeds a one piece has the edge because there is no waist join at all. Armour coverage and leather specification are identical between the two.\u003c\/p\u003e \u003ch3\u003eCan I wear the jacket on its own?\u003c\/h3\u003e\n\u003cp\u003eYes. That is the main practical advantage of a two piece — the jacket works as a standalone leather motorcycle jacket with its own armour.\u003c\/p\u003e \u003ch3\u003eHow long does it take to make?\u003c\/h3\u003e\n\u003cp\u003e19 to 28 business days, made to order and shipped worldwide. Made-to-measure sizing does not add time.\u003c\/p\u003e \u003ch3\u003eCan I have custom colours and my race number?\u003c\/h3\u003e\n\u003cp\u003eYes — colours, leather patchwork logos, rider name and number are all specifiable. See \u003ca href=\"\/en-ca\/collections\/custom-made-motorcycle-leather-suits-jackets\"\u003ecustom made suits and jackets\u003c\/a\u003e. Full armour details are on the \u003ca href=\"\/en-ca\/pages\/protection-safety\"\u003eprotection and safety\u003c\/a\u003e page.\u003c\/p\u003e","products":[{"product_id":"crimson-axis-2-piece-motorcycle-leather-suit","title":"Crimson Axis 2 piece Motorcycle Leather Suit","description":"\u003cp\u003eThe Crimson Axis 2 piece Motorcycle Leather Suit is a full race-specification leather suit in two piece configuration, built from full-grain cowhide with CE Level 2 armour at every protected position.\u003c\/p\u003e\n\n\u003cp\u003eThe jacket and trousers join with a full 360-degree connecting zip that runs the whole way around the waist, which is what most circuits require of a two piece. Cut to your own measurements, with a race fit that holds the armour over the joint it protects.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDesign reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e none, partial, full or selected panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece with a full 360-degree connecting zip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e unlimited combinations, any panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, race number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e none, small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching gear:\u003c\/strong\u003e gloves and boots in the same colourway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour is fitted?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you reproduce a design from a photograph?\u003c\/strong\u003e\u003cbr\u003eYes. Send a reference image and the layout, colours and panel design are reproduced in leather patchwork. Artwork is cut and stitched from coloured hide rather than printed, so it lasts the life of the suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be made as a one piece or two piece?\u003c\/strong\u003e\u003cbr\u003eBoth. A two piece uses a full 360-degree connecting zip around the waist. Specify at the time of order, as it cannot be converted afterwards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit a woman rider?\u003c\/strong\u003e\u003cbr\u003eYes. The suit is cut on your own measurements, so it is made on female proportions rather than adapted from a men’s pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if the fit is not right when it arrives?\u003c\/strong\u003e\u003cbr\u003eGet in touch through the \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact page\u003c\/a\u003e with photographs and your measurements and the garment will be assessed for adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a speed hump?\u003c\/strong\u003e\u003cbr\u003eYes, in small, medium or large, fixed or removable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat measurements do you need?\u003c\/strong\u003e\u003cbr\u003eChest, waist, hips, neck, shoulder width, sleeve length, torso length, inseam, thigh, plus height and weight. The \u003ca href=\"\/en-ca\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e shows how to take each one.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":49011813548274,"sku":"BRG-2S-CAX-001","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/redbluejacketandpants_2.png?v=1775511793"},{"product_id":"neon-crest-2-piece-motorcycle-leather-suit","title":"Neon Crest 2 Piece Motorcycle Leather Suit","description":"\u003cp\u003eThe Neon Crest 2 Piece Motorcycle Leather Suit is a full race-specification leather suit in two piece configuration, built from full-grain cowhide with CE Level 2 armour at every protected position.\u003c\/p\u003e\n\n\u003cp\u003eThe jacket and trousers join with a full 360-degree connecting zip that runs the whole way around the waist, which is what most circuits require of a two piece. Cut to your own measurements, with a race fit that holds the armour over the joint it protects.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDesign reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e none, partial, full or selected panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece with a full 360-degree connecting zip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e unlimited combinations, any panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, race number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e none, small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching gear:\u003c\/strong\u003e gloves and boots in the same colourway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour is fitted?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat measurements do you need?\u003c\/strong\u003e\u003cbr\u003eChest, waist, hips, neck, shoulder width, sleeve length, torso length, inseam, thigh, plus height and weight. The \u003ca href=\"\/en-ca\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e shows how to take each one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I have my name and race number?\u003c\/strong\u003e\u003cbr\u003eYes, in leather patchwork, along with team identity or any custom text.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for track days?\u003c\/strong\u003e\u003cbr\u003eYes. Most circuits require a one piece or a two piece with a full 360-degree connecting zip, and both are available. Check your circuit’s regulations before the day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy patchwork instead of printed graphics?\u003c\/strong\u003e\u003cbr\u003ePrinted designs sit on the surface and crack along the flex lines at elbows and knees, then fade in sun. Patchwork is dyed hide cut to shape, so the colour is the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes made to measure cost more?\u003c\/strong\u003e\u003cbr\u003eNo. Every suit is cut to order, so a made-to-measure fit is the same price and the same production as a standard size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm matches cowhide at 1.3–1.4 mm for abrasion resistance at lower weight, which is why racers use it. Full-grain cowhide is harder wearing and costs less.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":49011830718706,"sku":"BRG-2S-NCR-001","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/greenjacketandpants_2.png?v=1775512097"},{"product_id":"vanguard-rift-2-piece-motorcycle-leather-suit","title":"Vanguard Rift 2 Piece Motorcycle Leather Suit","description":"\u003cp\u003eThe Vanguard Rift 2 Piece Motorcycle Leather Suit is a full race-specification leather suit in two piece configuration, built from full-grain cowhide with CE Level 2 armour at every protected position.\u003c\/p\u003e\n\n\u003cp\u003eThe jacket and trousers join with a full 360-degree connecting zip that runs the whole way around the waist, which is what most circuits require of a two piece. Cut to your own measurements, with a race fit that holds the armour over the joint it protects.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDesign reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e none, partial, full or selected panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece with a full 360-degree connecting zip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e unlimited combinations, any panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, race number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e none, small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching gear:\u003c\/strong\u003e gloves and boots in the same colourway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour is fitted?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you ship worldwide?\u003c\/strong\u003e\u003cbr\u003eYes. Every suit is made to order and shipped worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy patchwork instead of printed graphics?\u003c\/strong\u003e\u003cbr\u003ePrinted designs sit on the surface and crack along the flex lines at elbows and knees, then fade in sun. Patchwork is dyed hide cut to shape, so the colour is the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a speed hump?\u003c\/strong\u003e\u003cbr\u003eYes, in small, medium or large, fixed or removable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you reproduce a design from a photograph?\u003c\/strong\u003e\u003cbr\u003eYes. Send a reference image and the layout, colours and panel design are reproduced in leather patchwork. Artwork is cut and stitched from coloured hide rather than printed, so it lasts the life of the suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes made to measure cost more?\u003c\/strong\u003e\u003cbr\u003eNo. Every suit is cut to order, so a made-to-measure fit is the same price and the same production as a standard size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat measurements do you need?\u003c\/strong\u003e\u003cbr\u003eChest, waist, hips, neck, shoulder width, sleeve length, torso length, inseam, thigh, plus height and weight. The \u003ca href=\"\/en-ca\/pages\/size-guides\"\u003esize guide\u003c\/a\u003e shows how to take each one.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":49011841007858,"sku":"BRG-2S-VGR-001","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/redjacketandpants_1.png?v=1775512242"},{"product_id":"inferno-pulse-2-piece-motorcycle-leather-suit","title":"Inferno Pulse 2 Piece Motorcycle Leather Suit","description":"\u003cp\u003eThe Inferno Pulse 2 Piece Motorcycle Leather Suit is a full race-specification leather suit in two piece configuration, built from full-grain cowhide with CE Level 2 armour at every protected position.\u003c\/p\u003e\n\n\u003cp\u003eThe jacket and trousers join with a full 360-degree connecting zip that runs the whole way around the waist, which is what most circuits require of a two piece. Cut to your own measurements, with a race fit that holds the armour over the joint it protects.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDesign reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e none, partial, full or selected panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece with a full 360-degree connecting zip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e unlimited combinations, any panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, race number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e none, small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching gear:\u003c\/strong\u003e gloves and boots in the same colourway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour is fitted?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm matches cowhide at 1.3–1.4 mm for abrasion resistance at lower weight, which is why racers use it. Full-grain cowhide is harder wearing and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I have my name and race number?\u003c\/strong\u003e\u003cbr\u003eYes, in leather patchwork, along with team identity or any custom text.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit a woman rider?\u003c\/strong\u003e\u003cbr\u003eYes. The suit is cut on your own measurements, so it is made on female proportions rather than adapted from a men’s pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get matching gloves and boots?\u003c\/strong\u003e\u003cbr\u003eYes. Any \u003ca href=\"\/en-ca\/collections\/motorbike-protective-gloves\"\u003eglove\u003c\/a\u003e or \u003ca href=\"\/en-ca\/collections\/motorbike-leather-boots\"\u003eboot\u003c\/a\u003e can be produced in the same colourway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for track days?\u003c\/strong\u003e\u003cbr\u003eYes. Most circuits require a one piece or a two piece with a full 360-degree connecting zip, and both are available. Check your circuit’s regulations before the day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if the fit is not right when it arrives?\u003c\/strong\u003e\u003cbr\u003eGet in touch through the \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact page\u003c\/a\u003e with photographs and your measurements and the garment will be assessed for adjustment.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":49011851821298,"sku":"BRG-2S-INP-001","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/redandblackjacketsandpants_2.png?v=1775512366"},{"product_id":"polar-vex-motorcycle-2-piece-leather-suit","title":"Polar Vex Motorcycle 2 Piece Leather Suit","description":"\u003cp\u003eThe Polar Vex Motorcycle 2 Piece Leather Suit is a full race-specification leather suit in two piece configuration, built from full-grain cowhide with CE Level 2 armour at every protected position.\u003c\/p\u003e\n\n\u003cp\u003eThe jacket and trousers join with a full 360-degree connecting zip that runs the whole way around the waist, which is what most circuits require of a two piece. Cut to your own measurements, with a race fit that holds the armour over the joint it protects.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDesign reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e none, partial, full or selected panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece with a full 360-degree connecting zip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e unlimited combinations, any panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, race number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e none, small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching gear:\u003c\/strong\u003e gloves and boots in the same colourway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour is fitted?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes made to measure cost more?\u003c\/strong\u003e\u003cbr\u003eNo. Every suit is cut to order, so a made-to-measure fit is the same price and the same production as a standard size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm matches cowhide at 1.3–1.4 mm for abrasion resistance at lower weight, which is why racers use it. Full-grain cowhide is harder wearing and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get matching gloves and boots?\u003c\/strong\u003e\u003cbr\u003eYes. Any \u003ca href=\"\/en-ca\/collections\/motorbike-protective-gloves\"\u003eglove\u003c\/a\u003e or \u003ca href=\"\/en-ca\/collections\/motorbike-leather-boots\"\u003eboot\u003c\/a\u003e can be produced in the same colourway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you ship worldwide?\u003c\/strong\u003e\u003cbr\u003eYes. Every suit is made to order and shipped worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you reproduce a design from a photograph?\u003c\/strong\u003e\u003cbr\u003eYes. Send a reference image and the layout, colours and panel design are reproduced in leather patchwork. Artwork is cut and stitched from coloured hide rather than printed, so it lasts the life of the suit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be made as a one piece or two piece?\u003c\/strong\u003e\u003cbr\u003eBoth. A two piece uses a full 360-degree connecting zip around the waist. Specify at the time of order, as it cannot be converted afterwards.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":49011861225714,"sku":"BRG-2S-PVX-001","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/whiteblackjacketanndpants_1.png?v=1775512492"},{"product_id":"vortex-neon-black-motorcycle-leather-2-piece-suit","title":"Vortex Neon Black Motorcycle Leather 2 Piece Suit","description":"\u003cp\u003eThe Vortex Neon Black Motorcycle Leather 2 Piece Suit is a full race-specification leather suit in two piece configuration, built from full-grain cowhide with CE Level 2 armour at every protected position.\u003c\/p\u003e\n\n\u003cp\u003eThe jacket and trousers join with a full 360-degree connecting zip that runs the whole way around the waist, which is what most circuits require of a two piece. Cut to your own measurements, with a race fit that holds the armour over the joint it protects.\u003c\/p\u003e\n\n\u003ch3\u003eOuter Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFull-grain cowhide leather, 1.3–1.4 mm, for high abrasion resistance — kangaroo 0.8–0.9 mm available as an upgrade\u003c\/li\u003e\n\u003cli\u003eDesign reproduced in leather patchwork, cut and stitched from coloured hide so it cannot crack, peel or fade like print\u003c\/li\u003e\n\u003cli\u003ePre-curved sleeves and legs with race-fit ergonomic panelling\u003c\/li\u003e\n\u003cli\u003eTriple safety stitching throughout with high-strength bonded nylon thread\u003c\/li\u003e\n\u003cli\u003eOriginal YKK zippers at the front, sleeve cuffs and ankles\u003c\/li\u003e\n\u003cli\u003eKevlar stretch panels at the crotch, behind the calves and under the sleeves\u003c\/li\u003e\n\u003cli\u003eAccordion leather stretch across the lower back and above the knees for a forward racing crouch\u003c\/li\u003e\n\u003cli\u003eReinforced leather at the shoulders, elbows, forearms, hips, knees and lower legs\u003c\/li\u003e\n\u003cli\u003eExternal CE certified protectors over the shoulders, elbows and knees\u003c\/li\u003e\n\u003cli\u003eRemovable external knee sliders with hook-and-loop attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInner Shell\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable CE Level 2 shoulder, elbow and knee armour certified to EN 1621-1:2012\u003c\/li\u003e\n\u003cli\u003eDedicated back protector compartment with a removable CE Level 2 protector certified to EN 1621-2:2014\u003c\/li\u003e\n\u003cli\u003eBreathable 100% polyester mesh lining for airflow and moisture management\u003c\/li\u003e\n\u003cli\u003eTwo internal pockets\u003c\/li\u003e\n\u003cli\u003eFully safety stitched interior\u003c\/li\u003e\n\u003cli\u003eRemovable internal lining available as an optional upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eArmour Specification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBody area\u003c\/th\u003e\n\u003cth\u003eStandard\u003c\/th\u003e\n\u003cth\u003eLevel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBack\u003c\/td\u003e\n\u003ctd\u003eEN 1621-2:2014\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShoulders\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbows\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnees\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012\u003c\/td\u003e\n\u003ctd\u003eLevel 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eArmour is KeepTech, independently tested and certified by Ricotest, European Notified Body No. 0498, Pastrengo, Italy, under EU Regulation 2016\/425 as Category II PPE, CE and UKCA marked. Level 2 transmits about 20 kN in the standard impact test against roughly 35 kN for Level 1. The armour is independently CE certified; the leather shell is not certified as a garment.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather:\u003c\/strong\u003e full-grain cowhide, kangaroo or Monaco hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStretch material:\u003c\/strong\u003e standard Kevlar or Schoeller-Keprotec® upgrade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e race, regular or relaxed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforation:\u003c\/strong\u003e none, partial, full or selected panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e one piece or two piece with a full 360-degree connecting zip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining:\u003c\/strong\u003e fixed or removable polyester mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e unlimited combinations, any panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogos:\u003c\/strong\u003e leather patchwork or printed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalisation:\u003c\/strong\u003e rider name, race number, team identity or custom text\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed hump:\u003c\/strong\u003e none, small, medium or large\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching gear:\u003c\/strong\u003e gloves and boots in the same colourway\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSize and Fit\u003c\/h3\u003e\n\u003cp\u003eCut to a close, performance-focused racing fit. Send your measurements for the tailor-made option at no extra cost, or select a standard size after checking the full chart.\u003c\/p\u003e\n\u003cp\u003eA new suit should feel firm standing upright and correct once you are sitting on the bike. Full-grain leather relaxes and moulds to you over the first few rides. Fit is a safety feature: a loose suit lets armour migrate off the joint it protects during a crash.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat armour is fitted?\u003c\/strong\u003e\u003cbr\u003eCE Level 2 at the back to EN 1621-2:2014 and at the shoulders, elbows and knees to EN 1621-1:2012, certified by Ricotest, Notified Body No. 0498, Italy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy patchwork instead of printed graphics?\u003c\/strong\u003e\u003cbr\u003ePrinted designs sit on the surface and crack along the flex lines at elbows and knees, then fade in sun. Patchwork is dyed hide cut to shape, so the colour is the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes made to measure cost more?\u003c\/strong\u003e\u003cbr\u003eNo. Every suit is cut to order, so a made-to-measure fit is the same price and the same production as a standard size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose cowhide or kangaroo?\u003c\/strong\u003e\u003cbr\u003eKangaroo at 0.8–0.9 mm matches cowhide at 1.3–1.4 mm for abrasion resistance at lower weight, which is why racers use it. Full-grain cowhide is harder wearing and costs less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get matching gloves and boots?\u003c\/strong\u003e\u003cbr\u003eYes. Any \u003ca href=\"\/en-ca\/collections\/motorbike-protective-gloves\"\u003eglove\u003c\/a\u003e or \u003ca href=\"\/en-ca\/collections\/motorbike-leather-boots\"\u003eboot\u003c\/a\u003e can be produced in the same colourway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you ship worldwide?\u003c\/strong\u003e\u003cbr\u003eYes. Every suit is made to order and shipped worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you reproduce a design from a photograph?\u003c\/strong\u003e\u003cbr\u003eYes. Send a reference image and the layout, colours and panel design are reproduced in leather patchwork. Artwork is cut and stitched from coloured hide rather than printed, so it lasts the life of the suit.\u003c\/p\u003e\n\n\u003ch3\u003eCare Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean the exterior with a soft, slightly damp cloth\u003c\/li\u003e\n\u003cli\u003eUse a leather cleaner and conditioner when required\u003c\/li\u003e\n\u003cli\u003eDo not machine wash, tumble dry or bleach\u003c\/li\u003e\n\u003cli\u003eRemove internal armour and lining before deep cleaning\u003c\/li\u003e\n\u003cli\u003eDry naturally, away from direct sunlight and artificial heat\u003c\/li\u003e\n\u003cli\u003eStore on a wide hanger in a cool, dry place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bleed Racing Gears","offers":[{"title":"Default Title","offer_id":49011870925042,"sku":"BRG-2S-VNB-001","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/files\/Blackmotorbikejacketandpants1_2.png?v=1775512686"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/7029\/9122\/collections\/redbluejacketandpants_2.png?v=1779610619","url":"https:\/\/bleedracinggears.com\/en-ca\/collections\/2-piece-motorcycle-suit.oembed","provider":"Bleed Racing Gears","version":"1.0","type":"link"}